BS-5070 Blister Sealing Packaging Machine
BS-5070 Blister Sealing Packaging Machine
Keywords:Blister Packaging Machine,blister
packaging blister machine,
blister
sealing machine
hinacoal07@gmail.com
https://www.chinacoalintl.com
https://m.chinacoalintl.com/
we provide service of enterprise's customs declaration, inspection.
BS-5070 Blister Packaging Machine Introduction
BS series blister
packaging machine is to sealing the contact surface between blister
cardboard and heater strip (different with UBS series blister packaging machine);
Blister packing by heater strip( different with UBS series);
Semi-automatic blister packaging and sealing without thermoforming;
One person operate one machine, speed is 6s/pcs;
Manual feeding the products to the blister molds ;
Easy to use by using digital time relay to control the operation ;
Pneumatic drive and need connect to air compressor ;
3 station to fix the blister molds for continuous blister packaging ;
Packing process controlled by proximity switch ;
Assemble the wooden disk and blister molds to the machine before using ;
cardboard and heater strip (different with UBS series blister packaging machine);
Blister packing by heater strip( different with UBS series);
Semi-automatic blister packaging and sealing without thermoforming;
One person operate one machine, speed is 6s/pcs;
Manual feeding the products to the blister molds ;
Easy to use by using digital time relay to control the operation ;
Pneumatic drive and need connect to air compressor ;
3 station to fix the blister molds for continuous blister packaging ;
Packing process controlled by proximity switch ;
Assemble the wooden disk and blister molds to the machine before using ;
BS-5070 Blister Packaging Machine Parameter
|
Model
|
BS-5070
|
|
Press plate size
|
500mm*700mm
|
|
Pressure
|
0.6T
|
|
Speed
|
10tims/min
|
|
Weight
|
130kgs
|
|
Voltage
|
220v 50~60hz
|
|
Power
|
2.5kw
|
|
Air-pressure
|
0.4~0.6mpa
|
|
Machine dimension
|
670mm*840mm*1600mm
|
|
Wooden disk size
|
1500mm*700mm*65mm
|
Blister sealing and
packaging
Heat press function
Blister molds
One machine need three blister molds
We need detail design of the blister for making the molds
Heat press function
Blister molds
One machine need three blister molds
We need detail design of the blister for making the molds

Comments
Post a Comment